GTM Artisan Metal - Laser Cut Metal Panels
Laser Cut Metal Screens for Architecture & Interiors

Technical Specs and Mounting Options

Depending on your installation and the design you select, we can provide a continuous flow of the pattern throughout the installation, and we can “interlock” the pattern so that you don’t see where the panels meet. All of our projects are custom and made to order. We fabricate panels to your project requirements and sizes for your application, however to cover a larger area with our panels, often we will have to use several physical panels to do it. The largest single panel we can laser cut at a time is just under 5’ x 10’, so to cover a larger area we would break that up into pieces.

UNDERSTANDING YOUR REQUIREMENTS

When designing your next architectural element, sign, or artisanal creation, here are some questions to consider in order to optimize your efforts.

  • Indoor or outdoor location
  • Harsh environment: Extreme heat or cold, salt air, etc.
  • Weight considerations
  • Material type: Aluminum, Steel, Stainless, Copper, Bronze, Brass
  • Material thickness
  • Overall size
  • Square footage to be covered
  • Number of pieces
  • Finish requirement: Powder coat, brush/sanded, polished, anodize, custom paint
  • Mounting type: Flush, raised
  • Mounting location: Floor, wall, building façade, ground, etc...

Material Weights per Sq. Ft. (before cutting loss - Material Thickness (inches)

Material Type 1/16 1/8 3/16 1/4 3/8 1/2
Aluminum 1 2 3 4 5 7
Stainless 2.5 5 7.5 10 15 20
Steel 2.5 5 7.5 10 15 20
Cor-ten 2.5 5 7.5 10 15 20
Bronze 3 6 9 12 18 24
Copper 3 6 9 12 18 24

Mounting Options

With Bolt Holes W/O Bolt Holes With Hardware W/O Hardware
Flush X X X X
Standoff X X X X
Single Bend, Weldless X X X X
Single Bend, Welded X X X X
GTM Double Bend, Weldless X X X X
GTM Double Bend, Welded X X X X
Framed Screen Mounting OptionGTM Artisan Metal offer laser cut screens in elegant slim line aluminum frames, powder coated in a range of bronzes, brass, copper, pewter, silver and quartz colors, to match screens. Framed space dividing screens can be provided with adjustable pedestal feet which compensate for any irregular floor to ceiling dimensions. This enables a fast installation at minimal cost. Moveable laser cut screens with frames are also available with an elegant weighted base allowing easy re-positioning to allow creative use of space in office, dining or pavement seating areas.

All Miles & Lincoln patterns/designs are copyright protected, and are not to be reproduced or modified without our written consent.
GTM Artisan Metal is the only US authorized fabricator for Miles & Lincoln designs, located in the US.

Contact Sales

Send us an Email

Laser Cut Metal Screens for Architecture & Interiors